HILO-test PG 10-504 Combination Wave Generator / Hybrid Generator (1.2 / 50 µs, 0.2 – 10 kV; 8 / 20 µs, 0.1 – 5kA)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input/output: Switch / 10 V

Connector for external safety interlock loop: 24 V =

External red and green warning lamps acc. to VDE 0104: 24 V =, 40 mA

Mains power: 230 V, 50/60 Hz

Dimensions of desk top case (W * H * D): 450*330*500 mm³

Weight: 25 kg

Combination Wave Generator acc. to IEC 61000-4-5: 2014 / IEC 61000-4-4: 2012

Test voltage (open circuit condition): 0.2 – 10 kV ± 10 %

Waveform acc. to IEC 60060: 1.2 / 50 µs ± 30/20 %

Test current (short circuit condition): 0.1 - 5.0 kA ± 10 %

Waveform acc. to IEC 60060: 8 / 20 µs ± 20 %

Polarity of output voltage/current, selectable: pos/neg/alt

Maximum stored energy: 500 Joule

Charging time for max. charging voltage: < 20 s

HV-output: isolated from ground HV-OUT, COM

Mains synchronous triggering:

Phase shifting, digitally selectable: 0 - 360 °, Step 1°

Ext. Sync. Input for synchronisation to the external CDN mains: built-in

Optical output for control of external CDN: built-in

Display of peak values of pulse voltage and current: built-in

Monitor output for pulse output voltage: ratio = 1000:1 ± 5 %

Monitor output for pulse output current: 10 V = 5 kA ± 5 %

Accessories

Power cable, turn key, HV-cable (1 m), instruction manual

Datasheet