HILO-test CWG-CE7 Compact EMC-Tester (7 kV, 1.2 / 50 μs; 3.5 kA, 8 / 20 μs)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input/output: Switch/10 V

Connector for external safety interlock loop: 24 V =

External red and green warning lamps: 24 V=, 40 mA

Mains power: 90V - 264V, 50/60 Hz

Dimensions of desk top case (W * H * D): 450*330*500 mm³

Weight: 25 kg

Internal 1-phased de-/coupling network (CDN)

Coupling-/decoupling network for power supply lines: L1, N, PE

Nominal voltage, nominal current: 300 V, 16 A ≈ / 300V, 16 A =

Coupling impedance (depending on the generator): 33 nF / 18 µF / 9µF+10Ω

BURST acc. to IEC 61000-4-4: 2012

Pulse output voltage, adjustable: 0.2 - 5 KV ± 10 %

Waveform: 5/50 ns

Source impedance: 50 Ω

Polarity, selectable: pos/neg/alt

Burst frequency, adjustable: 1.0 kHz - 1.0 MHz

Burst duration, adjustable: 0.01 ms - 25 ms

Burst period, adjustable: 10 ms - 1000 ms

HV output for external coupling devices: coaxial

Monitor output for pulse output voltage: ratio = 100:1 ± 5%, 50 Ω

SURGE acc. to IEC 61000-4-5: 2014

Test voltage (open circuit condition): 0.2 - 7.0 kV ± 10 %

Waveform acc. to IEC 60060: 1.2 / 50 µs ± 20/ ± 30 %

Test current (short circuit condition): 0.1 - 3.5 kA ± 10 %

Waveform acc. to IEC 60060: 8 / 20 µs ± 20%

Polarity of output voltage/current, selectable: pos/neg/alt

Maximum stored energy: 250 Joule

Charging time for max. charging voltage: max. 1Hz (min. 1s-10s)

HV output isolated from ground: HV-OUT, 4mm

Mains synchronous triggering, phase shifting, digitally selectable: 0 - 359°, step 1°

Monitor output for pulse output voltage: ratio = 1000:1 ± 5%

Monitor output for pulse output current: 10 V = 5 kA ± 5%

Datasheet