GW INSTEK LCR-8230A High-Frequency LCR Meter (DC, 10Hz~30MHz)

Test Frequency: DC, 10 Hz ~ 30 MHz; 6 digits, ±0.0007%

Output Impedance: 25 Ω / 100 Ω selectable

Basic Accuracy: ±0.08%

Test Speed:

MAX: 2.5 ms (>10 kHz)

FAST: 50 ms (>20 Hz)

MEDIUM: 100 ms

SLOW: 300 ms

SLOW2: 600 ms

Test Signal Level:

AC Voltage: 10 mV ~ 2 Vrms (FREQ. ≤ 1 MHz); 10 mV ~ 1 Vrms (FREQ. > 1 MHz or FREQ. ≤ 1 MHz and RO = 25 Ω)

AC Current: 100 μA ~ 20 mArms (RO = 100 Ω); 400 μA ~ 40 mArms (RO = 25 Ω)

DCR Voltage: 1 Vdc (40 mA max.)

Measurement Parameters:

Up to four parameters can be measured and displayed simultaneously.

Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc)

List Measurement:

Listed Steps: 15

Listed Parameters: Frequency / Vac / Iac / DC Bias / Comp / BIN

Trigger: AUTO, REPEAT, SINGLE

Sweep Measurement:

Swept Graphical: Two measurement parameters

Swept Parameters: Freq / Vac / Iac

Keep Trace function supported

Equivalent Circuit Model Analysis (for “A” series):

7 different equivalent circuit models

3-component models: 4 types

4-component models: 3 types

Other Functions:

Auto Level Control (ALC): Standard

DC Bias: 0 ~ ±12 V

Handler: PASS, FAIL and OK, NG or BIN 1–9

Other Features:

Correction: Open / Short / HF Load / Load

V/I Monitor: Vac, Iac, Vdc, Idc

Comparator: Value, Δ, Δ%

Buzzer: OFF, Pass, Fail

Average: 1 to 64

Display: 7" LCD color display (800 × 480)

Interface: USB / GPIB / LAN / RS-232 / Handler / USB Host / TRIGGER Input

Power Source: AC 100 V ~ 240 V, 50/60 Hz; Consumption: 65 VA (max.)

Dimensions & Weight: 346 (W) × 145 (H) × 335 (D) mm; Approx. 3.3 kg

Datasheet