GWinstek GRS-6032A Analog Digital Oscilloscope (30Mhz, 2 CH,100MSa/s)

Name: GWinstek GRS-6032A Analog Digital Oscilloscope (30Mhz, 2 CH,100MSa/s)
Brand: GW INSTEK

ManufacturerGW INSTEK(View more products from this manufacturer)

ModelGRS-6032A

Contact

Quantity

Secure Checkout

Quality Engagement

Easy change and return

Delivery Available

GRS-6032A

CRT

Type and Acceleration

6-inch CRT, 2kV

Illumination

Front panel control

Z-axis Input

Sensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)

Input Impedance : approx. 47kΩ

VERTICAL SYSTEM

Deflection Coefficient and Accuracy

1mV ~ 2mV/div ±5%,
5mV ~ 20V/div ±3%,
14 steps in 1-2-5 sequence

Variable Continuity

2.5 : 1 ~ min. 50V/div

Bandwidth (-3dB)

1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz

Vertical Mode

CH1, CH2, DUAL (ALT or CHOP)

Chopper Frequency

Approx. 250kHz

Sum or Difference

CH1+CH2, CH1-CH2

Invert

CH2

Input Impedance

1MΩ ±2%//approx. 25pF

Input Coupling

AC, DC, GND

Input Voltage

Max. 400V(DC+ACpeak)

HORIZONTAL SYSTEM

Sweep Time

0.2μs/div ~ 0.5s/div, 20 steps

Variable Continuity

2.5 : 1 up to 1.25s/div (uncal.)

Accuracy

±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG

Sweep Magnification

x5, x10, x20

Max. Sweep Time

50ns/div (10ns~40ns/div uncal)

ALT-MAG Function

Yes

HOLD-OFF Time

Variable

TRIGGER

Trigger Mode

AUTO, NORM, TV

Trigger Source

VERT, CH1, CH2, LINE, EXT

Trigger Coupling

AC, HFR, LFR

Trigger Slope

“+”or“ - ”polarity

ALT Trigger

Yes

Indicator Trigger LED

Yes

TV Sync. Separator

TV-V“-”, TV-H“ - ”

Trigger Sensitivity


GRS-6032A	20Hz~2MHz	2MHz~20MHz	20Hz~30MHz
CH1, CH2	0.5div	1.5div	2.0div
Vert-Mode	2.0div	3.0div	3.5div
EXT	200mV	800mV	1V

TV sync. pulse more than 1 div or 200mV (EXT)

External Trigger Input

Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak)

X-Y OPERATION

Input

X-axis : CH1 ; Y-axis : CH2

Sensitivity

1mV/div ~ 20V/div

Bandwidth

X-axis : DC ~ 500kHz (-3dB)

X-Y Phase Shift

<3° from DC ~ 50kHz

DIGITAL STORAGE

Acquisition Digitizer

8 bit ADC x 2

Max. Sampling Rate

500MSa/s for equivalent time sampling
100MSa/s for normal sampling

Storage Bandwidth

Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz

Dynamic Range

±5div

Memory Length- Acquisition Memory

2k words/CH x 2, 1k words/CH(equivalent)

Memory Length- Save REF Memory

1k words/CH x 10 with back-up memory (REF0~REF9)

Memory Length- Display Memory

1k words/CH x 4 waveform(max.)

Sweep Time

Equivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div

Sweep Magnification

x 5, x 10, x 20

Max.Sweep Time

10ns/div

MAG Interpolation

DOTS, LINEAR

ALT-MAG Function

Yes

Acquire Mode

Sample, peak detect(>25ns), Envelop. Persist, Average(2~256)

Operation Mode

Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop

Smoothing Function

Dot joint ON/OFF selectable

Pre-Trigger

Pre-trigger 0 ~10div in 0.02div steps

X-Y Operation

X-axis: CH1 Y-axis: CH2

Storage Bandwidth

DC~50MHz(-3dB)

Display Resolution

H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div

SAVE/ RECALL

Panel Setting

10 sets(M0 ~M9)

Waveform

10 sets(REF0~REF9)

READOUT & CURSOR

Cursor Measurement

ΔV, ΔT, 1/ ΔT

Readout Intensity

Adjustable

OUTPUT SIGNAL

CH1 Signal Output

Voltage : approx. 20mV/div (with 50Ω terminated)
Bandwidth : 50Hz ~ 5MHz

Calibrator Output

Voltage : 0.5V±3%
Frequency : approx. 1kHz, square wave

INTERFACE

RS-232C

POWER SOURCE

AC 100V/120V/230V±10%, 50/60Hz

DIMENSIONS & WEIGHT

275(W) x 130(H) x 370(D) mm; Approx. 8.5kg

Datasheet

Manual

Stay Updated with Offers

Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.

By subscribing, you agree to our Terms of Service and Privacy Policy.

Quick Support

Direct access to our certified experts