GW INSTEK GPE-1323 Single Channel Linear DC Power Supply (96W, 0~32V, 0~3A)

OUTPUT RATINGS

Independent: 0 V to 32 V, 0 A to 3 A

Series (2 units with series function): 0 V to 64 V, 0 A to 3 A

Parallel (2 units with parallel function): 0 V to 32 V, 0 A to 6 A

CONSTANT VOLTAGE OPERATION

Line Regulation: ≤ 0.01 % + 3 mV

Load Regulation: ≤ 0.01 % + 3 mV

Ripple & Noise: ≤ 0.5 mVrms (5 Hz to 1 MHz)

Setting Range: 0 V to 33.6 V

Setting/Readback Accuracy: ± (0.03 % of reading + 10 mV)

Setting/Readback Resolution: 1 mV / 0.1 mV

Maximum Remote Sensing Compensation Voltage: 1 V

Recovery Time: ≤ 100 µs (50 % load change, minimum load 0.5 A)

Temperature Coefficient: ≤ 300 ppm/°C

CONSTANT CURRENT OPERATION

Line Regulation: ≤ 0.2 % + 3 mA

Load Regulation: ≤ 0.2 % + 3 mA

Ripple & Noise: ≤ 2 mArms

Setting Range: 0 A to 3.15 A

Setting/Readback Accuracy: ± (0.3 % of reading + 10 mA)

Setting/Readback Resolution: 0.1 mA / 0.01 mA

Temperature Coefficient: ≤ 300 ppm/°C

PROTECTION

OVP Range: OFF, ON (1.8 V to 35.2 V)

OVP Resolution: 100 mV

OVP Accuracy: ≤ ± 100 mV

OCP Range: OFF, ON (0.15 A to 3.3 A)

OCP Resolution: 10 mA

OCP Accuracy: ≤ ± 20 mA

DISPLAY

LCD: 2.4-inch TFT LCD

INSULATION

Chassis and Terminal: 20 MΩ or above (DC 500 V)

Chassis and AC Cord: 30 MΩ or above (DC 500 V)

ENVIRONMENT

Operation Environment: Indoor use, Altitude: ≤ 2000 m; Ambient temperature: 0 °C to 40 °C; Relative humidity: ≤ 80 %; Installation category: II; Pollution degree: 2

Storage Environment: Ambient temperature: -10 °C to 70 °C; Relative humidity: ≤ 70 %

POWER SOURCE AND POWER CONSUMPTION

Power Source: AC (100 V, 120 V, 220 V, 240 V) ± 10 %, 50 or 60 Hz

Power Consumption: 300 VA

DIMENSIONS AND WEIGHT

Dimensions & Weight: 107 mm × 124 mm × 313 mm (W x H x D); Approx. 5.2 kg

Datasheet

Manual