GIGAHERTZ SOLUTIONS Safe & Sound EM3 LF Analyser (16.7 Hz and 50 Hz - 120 kHz/ 400 kHz)

Item weight: 0.96 kg

Frequency range:

Alternating magnetic fields (AC / 3D): 16.7 Hz and 50 Hz - 120 kHz

Alternating electric fields (AC / 1D): 16.7 Hz and 50 Hz - 400 kHz

Body voltage 50 Hz - 120 kHz

Filter: 16.7 Hz bandpass, FULL (>50 Hz without 16.7 Hz), >60 Hz high-pass, >2 kHz high-pass

Scope of delivery:

EM3 case

Safe & Sound EM3 measuring device

Measuring instructions & user manual

Calibration/test certificate (according to manufacturer)

46 cm measuring cable (red) for hand probe (4 mm banana plug)

6.1 m measuring cable (black) for grounding (4 mm banana plug)

Hand probe (aluminum)

Grounding clamp (alligator clip)

Grounding pin (approx. 20 cm)

2× AA batteries

Measurement range:

Alternating magnetic fields (typical): 0.01 mG – 25 mG (1 nT – 2500 nT) in the precise range

Extended range (reduced tolerance): up to 100 mG per axis or 173 mG (3D)

Alternating electric fields (frequency-dependent): 0.01 V/m – 200 V/m

Precise range (depending on frequency): 0.01 V/m - 10 V/m or up to approx. 45 V/m (up to 120 kHz), above that reduced tolerance up to 200 V/m

Body voltage: 1 mV - 12,000 mV

Input impedance: 10 MΩ + <100 pF

Sensor: Axes: 3 magnetic (X/Y/Z) / 1 electric

Signal rating: Measurement modes: RMS & PEAK

Power supply: 2× AA batteries (alkaline), typical runtime >12 hours (depending on usage)

Connections: USB-C (power), 3.5 mm (Audio)

Manual