FLUKE 729JP 2M Automatic Pressure Calibrator (2 MPa)

kPa range, resolution: -82.73 to 1034.21 kPa

Comment: For Japan, 1 MPa range, no wireless communication

Electrical specification:

Ranges:

mA measure, source and simulate: 0 mA to 24 mA

Volts dc measure: 0 V dc to 30 V dc

Resolution mA dc source, simulate and measure: 1 μA

Voltage dc measurement: 1 mV

Accuracy: 0.01% ±2 LSD all ranges (at 23 °C ±5 °C)

Stability: 20 ppm of full scale /°C from -10 °C to +18 °C and 28 °C to +50 °C

mA simulate external voltage requirement: 12 V dc to 30 V dc

Loop compliance voltage: 24 V dc @ 20 mA

mA simulate external voltage requirement: 12 V dc to 30 V dc

Temperature measurement only/100 Ω Pt(385) RTD: -50 °C to 150 °C (-58 °F to 302 °F)

Temperature resolution: 0.01 °C (0.01 °F)

Temperature accuracy: ±0.1 °C (0.2 °F) ±0.25 °C (±0.45 °F) combined uncertainty when using 720 RTD probe (optional accessory)

Drive capability: 1200 Ω without HART resistor, 950 Ω with internal HART resistor

Mechanical specification

Size (HxWxL): 7 x 27.94 x 17.27 cm (2.75 x 11 x 6.8 in)

Weight: 6.5 lbs., 2.95 kg

Ingress protection: IP54

Environmental specification

Operating temperature: -10°C to 50°C for measurement, 0°C to 50°C for pressure control

Operating temperature with battery: -10 °C to 40 °C

Battery will only charge to 40°C

Storage temperature: -40°C to 60°C

Datasheet

Manual