FLIR FH-608 ID Multispectral Fixed Camera (640 x 512, 8° FOV)

General

Dimensions (L x W x H): 314 x 233 x 124 mm/12.4" x 9.2" x 4.9"

Power Consumption: Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W

Surge Immunity on AC Power Lines: EN 50130-4

Surge Immunity on Signal Lines: EN 50130-4

Environmental

Humidity: 0-95% relative humidity

IP Rating (dust & water ingress): IP66 & IP67

Operating Temperature Range: -40°C to 70°C/-40°F to 158°F

Shock: IEC 60068-2-27

Storage Temperature Range: -50°C to 85°C/-58°F to 185°F

Vibration: IEC 60068-2-64

Measurement & Analysis

Analytics Features: Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier

Analytics Management: Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control

Measurement Accuracy: N/A

Object Temperature Range: N/A

System Integration

Control Input/Output: Input: two dry alarm contacts; Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed

Ethernet: 100/1000 Mbps

External Analytics Compatible: Yes

Network APIs: NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T

Streaming Resolution:

Primary Stream: Thermal: VGA (640x512), QVGA (320 x 256); Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480

Secondary Stream: Thermal: VGA (640x512), QVGA (320 x 256); Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480

Supported Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF

Video Over Ethernet: Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal

Thermal Camera

Array Format (Thermal): 640 × 512

Detector Pitch (Thermal): 17 µm

f number (Thermal): f/1.1

Field of View (FOV) (Thermal): 8.6°×6.6°

Image Uniformity Optimization: Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers

Spectral Range (Thermal): 7.5 µm to 13.5 µm

Thermal AGC Modes: Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting

Thermal AGC Region of Interest [ROI]: Default, Presets and User definable to insure optimal image quality on subjects of interest

Thermal Sensitivity - NETD (Thermal): <25 mK @ 25°C F# 1.0

Video Frame Rate (Thermal): NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz

Video & Recording

Composite Video NTSC or PAL: Hybrid system with IP & analog video

Local Storage: Support for SD Card (not supplied)

Visible Camera

Array Format (Visible): 4K 2160p (3840 x 2160)

f number (Visible): 2.0

Field of View (FOV) (Visible): 11°×6°

Video Frame Rate (Visible): 30 Hz or less

Datasheet

Specifications