Elcometer PG70ABDL Precision Thickness Gauge (0.15~254mm, IP54, datalogging, RS232, A-scan, B-scan)

Tough, impact, waterproof and dust resistant equivalent to IP54
Measurement Mode: PE, IE & EE
Measurement Rate:
+ 4 readings per second
+ 32 readings per second
+ 6 readings per second
Thickness Range:
+ PE (contact) on steel: 1.000 - 254mm (0.040 - 10.000 inches)
+ PE (contact) on plastic: from 0.254mm (0.010 inches)
+ IE on steel: 1.27 - 25.4mm (0.050 - 1.000 inch)
+ IE on plastic: from 0.127mm (0.005 inches)
+ EE (contact) on steel: 2.54 - 76.20mm (0.100 - 3.000 inches) -
+ EE on steel: 0.15 - 12.70mm (0.006 - 0.500 inches)
Measurement Accuracy: ±1% or ±0.02mm
Measurement Units: mm or inches
Selectable Reading Resolution: 0.01mm / 0.001mm
Calibration Options: Single, two point, velocity & material type
Datalogging: 2,000 readings
RS232 Interface: Bi-directional
Battery Type: 3 x AA alkaline
Battery Life (approximate): 150 hours
Operating Temperature: -10 to 60ºC (14 to 140ºF)
Size (w x h x d): 63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
Weight (including batteries): 383g (13.5oz)
RS232 Interface: Bi-directional
Packing List: Elcometer NDT PG70ABDL precision gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, software, transfer cable

Note: A transducer is not suppied with the Gauges, must be ordered separately

Datasheet

Manual