Dwyer MTL5541 Galvanic Barrier, DIN Rail Mount, Plug-In, for Dwyer® Hazardous Areas (mA)

Weight: 5.3 oz

Accuracy: ± 15 µA

Mounting: T-section 35 mm DIN rail to EN 50022

Isolation: 250 V RMS, tested at 1500 V RMS minimum, between safe-area and hazardous-area terminals; 50 V between safe-area circuits and power supply

Compliance: FM, UL

Input Type: mA

Output Detail: Signal range: 4-20 mA; Under/over-range: 0-24 mA

Output Signal: Current

Response Time: 50 µs

LED Indicators: Green: Power indication

Supply Voltage: 20 to 35 Vdc

Terminal block: up to 2.5 mm²

Load Resistance: 0 to 360Ω @ 24 mA / 0 to 450Ω @ 20 mA

Current Sink, Max: 600 Ω max

Electrical Safety: Vo= 28 V Io= 93 mA Po= 651mW Um= 253 RMS or DC. Weight: 5.3 oz (150 g)

Output Resistance: >1 MΩ

Power Consumption: 1 W

Relative Humidity: 5 to 95% RH

Supply Power Type: DC

Temperature Drift: < 0.8µA/°C

Response Time Note: Settles to within 10% of final value within 50 µs

Input Control Signal: 16.2 Vdc

Storage Temperature, Max: 176 °F

Storage Temperature, Min: -40 °F

Operating Temperature, Max: 140 °F

Operating Temperature, Min: -6 °F

Datasheet