Cosmopia ES-1006LH Air Flow Type Thermal Shock Testing Apparatus (130℃/30 min.;− 70℃/75 min; 1,080 L)

Type: Stationary sample type, cool/hot air switchable, two/three zone switchable

Testing temperature range:

Low-temperature testing: −65 to 0℃

High-temperature testing: 60 to 120℃

Temperature fluctuation margin: ±0.5℃

Temperature rise time (high-temp chamber): Room temperature to 130℃: Within 30 min.

Temperature drop time (low-temp chamber): Room temperature to −70℃: Within 75 min.

Temperature cycle performance:

Cycles: 5 cycles (low-temperature start)

Testing chamber temperature/time (Low): −35℃ / 30 min.

Testing chamber temperature/time (High): 85℃ / 30 min.

Temperature measurement position: Upwind side

Sample Type: Plastic molded IC, iron block

Sample weight / Temperature return time:

50 kg (equivalent to iron block) / Within 5 min.

100 kg (equivalent to iron block) / Within 10 min.

Cooling method: Water-cooling

Exterior: Cold-rolled steel plate, natural gray (Munsell code: 1.0Y8.5/0.5)

Testing chamber volume: 1,080 L

Testing chamber dimensions (W×D×H): 1,450 × 1,000 × 750 mm

Product dimensions (W×D×H): 2,355 × 1,805 × 2,200 mm

Permissible sample weight inside testing chamber: 100 kg (sample and shelf 25 kg × 4 shelves or less)

Refrigerant type: High-temperature side: R404A, Low-temperature side: R23

Operational noise: 65 dB(A)

Dry air: Pressure: 0.4 to 0.7 MPa, Consumption: Approx. 7.6 L(ANR) per cycle

Coolant amount: 4,200 L/h

Power supply: Three-phase 200V 50/60Hz, Three-phase 220V 60Hz, Three-phase 380V 50Hz

Maximum load current / Power supply capacity: 159 A / 55 kVA

Product weight: 1,800 kg

Datasheet