Cosmopia ER-105EXNT Walk-In Type Temperature Chamber (－10 ~ 80℃; 9.7m²)

Walk-in type temperature and humidity chambers: Water-cooling

Temperature Range: －10 to 80 ℃

JTM K07

Temp./Humidity Fluctuation: ±0.3 ℃

Temp./Humidity Gradient: ±2.5 ℃

Spatial Temp./Humidity Deviation: ±2.0 ℃

Temp. Change Rate (Rise): 2.0°C/min. (-1 to 71°C)

Temp. Change Rate (Drop): 1.2°C/min. (71 to -1°C)

Time to Reach Extreme Temp. (Rise): Within 50 min. (20 to 80°C)

Time to Reach Extreme Temp. (Drop): Within 60 min. (20 to -10°C)

Testing Room Floor Space: 9.7 m²

External Dimensions (W×D×H): 3,600 × 2,700 × 2,325 mm

Internal Dimensions (W×D×H): 3,450 × 2,550 × 2,100 mm

Exterior / Interior Materials: Color steel plate (ivory) / Stainless steel plate

Floor Load Capacity: 5.9 kN/m²

Door (Width x Height): 830 x 1,800 mm (Single opening, 1 location)

Observation Window (W×H): 190 x 320 mm (Door area, 1 location)

Inner Light: 2 lamps (60 W capacity)

Cable Hole: ø50 mm, 1 location (with rubber plug)

Temperature Control Unit: EU-125EXNT

Defrosting Method: Off-cycle defrosting (refrigerator operation stopped, room temperature 5 to 40°C), temperature-increase defrosting (room temperature -40/-30/-10 to 5°C)

Power Supply: Three-phase 200V 50/60Hz

Maximum Load Current: 60 A

ELB Capacity: 75 A

Coolant Water Volume: 4,200 L/h (at 32℃ inlet temperature)

Coolant Water Pressure: 0.1 to 0.5 MPa

Coolant Water Temperature: 18 to 32 ℃

Coolant Piping Dimensions (Inlet/Outlet): Rc1 1/4 / Rc1 1/4

[High load mode] Heat generation load (40°C): 6 kW

[Standard mode] Heat generation load (40°C): 6 kW

Datasheet