Cosmopia EC-36LHP Temperature And Humidity Chambers (-70 ~ 100 ℃ / 20 ~ 98 %RH; 306L; 30A)

Temperature/humidity range: -70 to 100 ℃ / 20 to 98 %RH

JTM K09

Temperature/humidity fluctuation (100.0℃ or lower): ±0.3 / ±2.5 ℃/%RH

Temperature/humidity fluctuation (100.1℃ or higher): –

Temperature/humidity gradient (100.0℃ or lower): 4.0 / 10 ℃/%RH

Temperature/humidity gradient (100.1℃ or higher): –

Spatial temperature/humidity deviation (100.0℃ or lower): 3.0 / 5 ℃/%RH

Spatial temperature/humidity deviation (100.1℃ or higher): –

Temperature change rate (Drop): 1.0℃/min. (83 to -53℃)

Temperature change rate (Rise): 3.0℃/min. (-53 to 83℃)

Time to reach temperature extreme (Drop): Within 70 min. (20 to -70℃)

Time to reach temperature extreme (Rise): Within 30 min. (20 to 100℃)

Exterior: Stainless steel plate (SUS430, hairline finish)

Testing chamber volume: 306 L

Testing chamber dimensions (w x d x h): 630 x 540 x 900 mm

Product dimensions (w x d x h): 1030 x 1090 x 1695 mm

Refrigerant: Dual refrigeration high-temperature side: R404A, Dual refrigeration low-temperature side: R508A

Controller: Operation modes: Set-point or program operation (Steps: 20 per pattern, Repetitions: Max. 98 and infinite)

Safeguards: Earth leakage circuit breaker, operation circuit fuse, electric motor overload safeguard, high-voltage shutdown system, excess temperature increase prevention system, empty heating prevention system, heater overcurrent safeguard, etc.

Equipment: Observation window, cable hole, chamber light, casters, level adjusters, USB port, RS-232C interface, etc.

Accessories: Instruction manual, soft silicon plug for cable hole, and wick

Power supply: Three-phase 200V 50/60Hz, Three-phase 220V 60Hz, Three-phase 380V 50Hz

Maximum load current: 30 A

Product weight: 370 kg

Datasheet