Comet M1140 Ethernet Multilogger - thermo hygro meter with 4 MiniDIN inputs (AC adapter 230Vac/5Vdc)

Measured value: Temperature, Relative humidity, Counted values (Dew point…)

Temperature sensor - external probe PT1000:

Measuring range: -200 to +600 °C

Accuracy: ±0.2 °C (-200 to +100 °C);

±0.2 % from reading from +100 to +600 °C

Resolution: 0.1 °C

Temperature + humidity sensor - external probe T+RH DIGI:

Measuring range: according to the connected probe Digi/M

Accuracy: according to the connected probe Digi/M

Resolution: 0.1 °C

Dew point:

Measuring range: according to the connected probe Digi/M

Accuracy: according to the connected probe Digi/M

Resolution: 0.1 °C

Operating temperature: -10 to +60 °C

Channels: 4x external temperature probe or connectable temperature+humidity probe

Counted values: Dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy

Memory: 1 000 000 values (noncyclic record), 600 000 values (cyclic record)

Recording interval: 1s to 24 hours

Display and alarm refresh: each 10 s

Recording mode: noncyclic - data logging stops after filling the memory

cyclic - after filling memory oldest data is overwritten by new

Available temperature units: degrees Celsius, degrees Fahrenheit

Communication interface: Ethernet, USB, RS232

Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK

Alarm protocols: E-Mail

Power: AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)

Protection class: IP20

Dimensions (without connectors): 178 x 95 x 37mm, without attached cables

Weight (including batteries): approx. 380 g

Included in delivery:

M1140

Instruction Manual

Traceable Calibration Certificate

3x Rechargeable Battery AA

Power Supply

USB Cable

Wall Holder

FREE FULL VERSION Analytical Software COMET Vision

EXTERNAL PROBES ARE NOT INCLUDED IN DELIVER

Datasheet

Manual