Chang AI CI-PC952 Explosion-proof hydrogen sulfide analyzer (0~10000ppm H2S)

Range: 0~10000ppm H2S

Resolving power: 0.1ppm

Accuracy: ±2%FS

Repeatability: ±1%FS

Stability: ±1%FS/7d

Response time: T90<35s(0~20ppm)

Recovery time: <60s

Protection level: IP64

Measurements: On-line

Calibration cycle: One year (recommendation)

Measuring instrument weight: Net weight 5.0 kg,about 15 kg after packaging

Power supply: 24V DC

Power waste: Less than 15VA

Communication: RS485(Standard Matching)/RS232 (Optional Matching)

Alarm: Alarm point:1; Relay Contact Capacity:24VDC,0.2A

Analog output signal: Group 1,4-20mA/0-20mA/0-1V/0-5V/0-10V/1-5V,output mode can be set freely; Load:less than 500Ω

Environmental temperature: -10~45°C; Environmental humidity:Less than 90% RH

Sample flow rate: 400-500ml/min(recommended 450ml/min)

Sample pressure: Atmospheric pressure ±10% (outlet should be atmospheric pressure)

Inlet and outlet: 1/4-inch NPT internal thread,stainless steel material (standard 1/4-6 card-plastic joint)

Sensor life: More than 2 years (normal use)

Instrument life: More than 5 years (normal use)

Cabinet size: L x W x D= 321 mm x 200 mm x 134.5 mm

Installation mode: Wall hanging type

Installation dimensions: L*W=335 mm*180 mm

L*W*H=300*200*175mm; Flowmeter:Selection