Beich CH2711 Power Supply Comprehensive Tester (150V; 0.1W-12kW; Integrate DC electronic load)

Rated value

- Input voltage in electronic load: 0~150V

- Input current in electronic load: 0.1mA~30A

- Input power in electronic load: 150W

- Input voltage in power meter: 5-600V AC (Range auto switch), peak voltage:700V AC, Min. test voltage 5V AC, resolution 0.1V

- Input current in power meter: 10mA-20A AC( Range auto switch), peak current: 26A AC, Min. test current 10mA AC

- Input power in power meter: 0.1W-12kW

Specification in electronic load: Range/ Accuracy/ Resolution

- Load accuracy: 0-9.9999V/ ±(0.05%+0.03%FS)/ 0.1mV

10V-99.999V/ ±(0.05%+0.03%FS)/ 1mV

100V-150V/500V/ ±(0.05%+0.03%FS)/ 10mV

0-9.9999A/ ±(0.05%+0.05%FS)/ 0.1mA

10-15A/30A/ ±(0.05%+0.05%FS)/ 1mA

- CV mode: 1.5V-18V/ ±(0.05%+0.03%FS)/ 0.1mV/ 1mV

1.5V-150V/500V/ ±(0.05%+0.03%FS)/ 10mV

- CC mode: 0-3A/ ±(0.05%+0.05%FS)/ 0.1mA

0-15A/30A/ ±(0.05%+0.05%FS)/ 1mA

- CR mode: 0.1Ω-5Ω/ ±(0.2%+0.2%FS)/ 0.001Ω

0.5Ω-50Ω/ ±(0.1%+0.1%FS)/ 0.01Ω

5Ω-500Ω/ ±(0.1%+0.1%FS)/ 0.1Ω

500Ω-5KΩ/ ±(1%+1%FS)/ 1Ω

- CP mode: 0-50W/ ±(0.1%+0.1%FS)/ mW

0-150W/ ±(0.1%+0.1%FS)/ 10mW

0-300W/ ±(0.1%+0.1%FS)/ 0.1W

- Transient test mode: Min plus width: 0.1ms

Max plus width: 999s

Rising/Falling edge resolution: 0.1ms

Max Rising/Falling edge time: 6s

- List test mode: Rated Voltage, Rated Current, Rated Power, Rated Resistance, SHORT, OPEN

Specification in power meter

Wiring: Phase

Test mode: Trms

Voltage input mode: AC

Power factor range: 0.001-1.000 Formula: W÷[ (V)× (A)]= (PF)

Frequency range: 45-65Hz

Test accuracy: ±0.4% reading+0.1 % range

Test speed: 5 times/s

Input impedance: ≥1MΩ (All voltage bins)

Whole set parameter

Interface: RS-232C,USB Device

Input voltage range: 110V/220V AC, 50/60 Hz

Dimension and weight: 21mm*88mm*335mm; 6kg

Datasheet

Manual