Ainuo AN5135-100(F) Programmable DC Power Supply (0 ~ 35V, 0 ~ 100A, 0 ~ 3000W)

Input: Single phase, 220V ± 22V, 47–63Hz

Output:

Voltage: 0 ~ 35V

Current: 0 ~ 100A

Power: 0 ~ 3000W

Resolution / Accuracy

Voltage: Resolution 0.01V, Accuracy ≤ 0.2% Umax

Current: Resolution 0.01A, Accuracy ≤ 0.35% Imax

Ripple and Noise  (20Hz–20MHz)

Vrms: 30mV

Vpp: 200mV

Effect

Voltage: Load effect ≤ 0.1% Umax, Source effect ≤ 0.05% Umax

Current: Load effect ≤ 0.2% Imax, Source effect ≤ 0.1% Imax

Transient response time: ≤5ms

Rise time 100%: On line voltage adjustment: 50ms (10%–90%), Start slow-rise time: 1s

Communication: RS-232 (Standard) / RS-485 (Optional) / Analog interface (Optional)

Protection: Output short-circuit protection, output overvoltage, overheat, S-terminal over-compensation protection, S-terminal reversal protection

List test function (Optional):

Capable of storing 50 sequences, each sequence contains 20 steps; Each step can be set independently, total 13 independent functions

Environment: 0~40℃; Humidity 20~90%RH

Dimension: 440×133×350 mm

Weight: 13.5 kg

*Images for illustration purposes only

Datasheet