AE-MIC AE-1155D DC Low Ohm Meter (0mΩ~1.5kΩ, 1mA~1A, <9V)

Range: Measuring range/ Resolution/ Current

1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/1A

10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/1A

100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 300mA

1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/100A

10Ω: 0.000Ω~15.000Ω/ 1mΩ/ 100A

100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA

1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA

%: 0.1mΩ～1.0000kΩ/±50.00%/ 0.01%[10nΩ]/ Mentioned above

Voltage at terminals open: Below 9V

Measuring method: 4-terminal measurement [contact check is available]

Measuring time: 【Free running 】2～10times/sec.

【External start】about 9msec～400msec.

Comparator setting range:

mΩ test mode: 0~15000[both for low and high limit]

% test mode: 50.00%[low limit:0～-50.00%、high limit:0～+50.00%]

Indication of comparator determination result: LO/GO/HI, LED display and buzzer.

Control signal:

input: START “L”[0V]→”H”[DC12V]⇒start

HOLD “L”[0V]⇒hold / open or ”H”[DC12V]⇒free run

output: LO/GO/HI, CONT-E and EOC/ open collector [40V/100mA max.]

Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%

Power supply: AC85V~265V,50~60Hz, about 60VA

Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)

Weight: About 3kg

Option:

- RS-232C/ GP-IB/ LAN/ Printer output (Centronics) (Only one kind of interface can be provided with the checker)

- Printer cable

- Short termination (Zero ohm standard resistor)

Datasheet