AE-MIC AE-1152F 5A DC Low Ohm Meter (0mΩ~1.5kΩ, 1mA~5A, <4V)

Range: Measuring range/ Resolution/ Current

1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/ 5A

10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/ 1A

100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 1A

1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/ 100mA

10Ω: 0.000Ω~15.000Ω/ 1mΩ/100mA

100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA

1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA

%: 0.01mΩ~1kΩ/±50.00%/ 0.01%[1nΩ]/ Refer to above

Voltage at terminals open: Below 4V

Measuring method: 4-terminal measurement [contact check is available]

Sampling time: 【Free running 】2～10times/sec.

【External start】about 9msec～400msec.

Comparator setting range:

Absolute value measurement :0～15000[both for low and high limit]

% measurement: low limit -50〜0%,high limit: 0～+50%

Indication of comparator determination result: LO/GO/HI, LED display and buzzer.

Control signal:

Start signal：start by ”L”[0V]→”H”[DC12V]

Hold signal：Open and”H” [DC12V]：Free run,”L”[0V]：Hold

Determination result signal [LO/GO/HI]： open collector output max40V, 100mA

Contact check error [CONT-E]： open collector output max40V, 100mA

Termination signal [EOC]： open collector output max40V, 100mA

Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%

Power supply: AC85V~265V,50~60Hz, about 60VA

Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)

Weight: About 3kg

Option:

- RS-232C I/F; GP-IB I/F; LAN I/F; Bar code/ two-dimensional code reader ＋RS—232C I/F (Only one kind of interface can be provided with the checker)

- Printer output (Centronics）I/F

- Each cable（RS-232C,GP—IB,printer）

- Short termination(Zero ohm standard resistor)

Datasheet