AE-MIC AE-1142B Low Cost, High Accuracy, DC Ohm Meter (0.00mΩ~15.000MΩ)

Range: Measuring range; resolution (at 23℃±5℃)

100mΩ: 0.00mΩ~150.00mΩ; 10μΩ

1000mΩ: 0.0mΩ~1500.0mΩ; 100μΩ

10Ω: 0.000Ω~15.000Ω; 1mΩ

100Ω: 0.00Ω~150.00Ω; 10mΩ

1000Ω: 0.0Ω~1500.0Ω; 100mΩ

10kΩ: 0.000kΩ~15.000kΩ; 1Ω

100kΩ: 0.00kΩ~150.00kΩ; 10Ω

1000kΩ: 0.0kΩ~1500.0kΩ; 100Ω

10MΩ: 0.000MΩ~15.000MΩ; 1kΩ

%: 5mΩ~10MΩ/±50.00%; 0.1%【5μΩ】

Measuring method: 4-terminal measurement with contact check.

Measuring time: 【Free running mode】2~10times/sec.

【Remote start mode】about 3.4msec/30msec.

Comparator setting range: Ω test mode: 0~15000[both for the upper and lower limit]

% test mode: 50.0% [LOW:0~-50.0%/ HI:0~+50.0%]

Indication comparator’s comparison result: LO/GO/HI, LED display and buzzer.

Control signal: input: START “L”[0V]→”H”[DC12V]⇒start

HOLD “L”[0V]⇒hold / open or ”H”[DC12V]⇒free run

output: LO/GO/HI, CONT-E and EOC/ open collector

Operation condition: 【Temp.】+5℃~+40℃、【Humidity】below 85%

Outer dimension: 260(W)×90(H)×250(D)mm【excluding protruding parts such as rubber legs, etc.】

Weight: about 2.0kg

Power supply: AC85V~265V、50~60Hz、about 20VA

Option:

- RS-232C/ GP-IB/ Printer output [Centronics] (Only one kind of interface can be provided with the checker)

- Pt Sensor

- Printer Cable

- Short termination (Zero ohm standard resistor)

Datasheet