Action Power AGL-50-4508 Regenerative AC Source & Load (500kVA; 450V)

Output Power [kVA]: 500

Voltage Range [V] @ L-N: 0-450

Frequency Range [Hz]: 40-70

Max. Current [A] @ 3 phase: 757

Size (WHD) [mm]: 4400x1950x1400

Weight [kg]: 4360

Load Mode

Linear Load:

+ CC: Current, power factor, load type, current slope, output waveform

+ CP: Apparent power, power factor, load type, power slope, output waveform

Nonlinear Load: Current, power, peak factor, current slope, power slope

Zero-voltage Start: Simulate on-load start, switch seamlessly to CC or CP after start, with configurable switching condition

Voltage

Voltage Distortion Limit: Uthd <10% below 20th

Current

Resolution: 0.01A

Accuracy: ±0.2% F.S. @ CC mode

Waveform: sine, square wave, triangular wave, clipping wave, customized waveform

Current Distortion: <2%@50Hz@ full load under rated voltage

Current Slew Rate: 10%~90% nominal current > 1A/μs

Response Time: <1ms@10%~90% nominal current

Frequency

Range: 40–70Hz

Accuracy: ±0.01Hz

Harmonic Injection

Order: 50th@50Hz/60Hz

Content:

+ Max 40% for 2-10 single harmonics, and no more than 40% for 2-10 total harmonics

+ Max 20% for 10-20 single harmonics, and no more than 20% for 10-20 total harmonics

+ Max 10% for 21-30 single harmonics, and no more than 10% for total harmonics

+ Max 5% for 31-50 single harmonics, and no more than 5% for total harmonics

Power

Resolution: 1VA

Resolution (VA): ±0.5% F.S. @ CP mode

Power Factor

Power Factor: -1 to 1(resistance inductance, resistance capacity and current direction can be set)

Resolution: 0.01

Crest Factor

Scope: 1.414 to 4

Resolution: 0.001

* Specification of AC source mode is same with AGS series

Datasheet