Action Power ABS-50-1212 Battery Simulator (±500kW)

Power [kW]: ±500

Output Voltage [V]: 12-1200

Output Current [A]: ±1250

Size (WHD) [mm]: 2010x1955x1200

Weight [kg]: 3020

Basic parameters

Output mode: CV, CC,CP, CR, programmable and battery simulation functions

Energy feedback: Receive load energy and feed it back to the grid

Isolation function: Electrical isolation of input and output

Parallel function: Multiple sets of the same model can be installed in parallel

DC output

Voltage

Resolution (V): 0.01

Accuracy: ±0.1% F.S.

Ripple(RMS): 0.1% F.S (resistive load)

Voltage slew rate: 200V/ms

Current

Resolution (A): 0.01

Accuracy: ±0.1% F.S.

Ripple(RMS): 0.1% F.S. (resistive load)

Slope: 500A/ms

Rise time: ≤2ms (10%~90% rated current)

Switching time: ≤4ms (switching from -90% to +90%)

Peak time: 60s (1200V type)

Battery simulation

Battery type: Different battery types such as lithium manganate, lithiumcobaltate, lithiumiron phosphate, nickel-hydrogen, ternary lithium, lithiumtitanate, andlead-acid batteries can be simulated

User-defined battery types and open first, second and third-order RCbatterymodels are supported

Parameter: Number of batteries in series connection, number of batteries in parallel connection, initial SOC, initial temperature, internal resistance, cell capacityand other parameters

Interface: Import of CSV user-defined model is supported

Real-time performance: 1ms command refresh rate

Virtual resistance

Scope: -2 to +2 Ω

Resolution: 1 m Ω

Universal programmable

Programming steps: 200 steps

Programming parameters: Voltage/current, rise time, hold time, trigger pulse output

Rise time range: 1ms-99999s

Flat top time range: 1ms-99999s

Minimum programming time step: 1ms

Editing mode: Add, delete, import, export

Operation mode: Run, stop, loop

Trigger mode: Automatic, manual, external

Measurement

Voltage accuracy: ±0.1% F.S.

Voltage resolution (V): 0.001

Current accuracy: ±0.1% F.S.

Current resolution (A): 0.001

Power accuracy: ±0.2% F.S.

Power resolution (KW): 0.001

AC input

Wiring mode: Three-phase four-wire ABC+PE

Frequency (HZ): 47 - 63

Voltage range (V): 380V±15%

Power factor: 0.99 @ full load

Efficiency: Models of 300kW and above: > 94%, others: > 90%. Harmonic current: ≤3%

Others

Protection function: OVP, OCP, OPP, OTP, Phase loss protection Communication interface Standard configuration: LAN; optional: RS485, CAN

External interlocking: External interlocking input is normally on/off; external interlocking output isnormally on/off.

Trigger signal: Trigger input/output

Control and display: Touch screen control and remote host computer control; display voltage, current, power and operation trend chart

Bleeder resistor cabinet (optional): Under abnormal working conditions of the system, energy will be releasedthrough the bleeder resistor cabinet to ensure the safety of the test object

Capacitance compensation component (optional): Voltage drop caused by cable impedance and the voltage ripple fromtheunit under test

Insulation and withstanding voltage: 10MΩ/DC500V；3600VAC(5000VDC)/1min

Cooling mode: Fan cooling

Operating temperature: -10℃～40℃

Relative humidity: 10% to 90% RAH

Altitude: ≤2000m

Datasheet