ACEY ACEY-VSS200 Battery Vacuum Heat Pre-sealing And Electrolyte Diffusion Chamber All-in-one Machine

Power Supply: 110–240 V, single phase, 50/60 Hz

Max. Power: 500 W

Compressed Air: 0.5–0.8 MPa

Chamber Body: 12 mm thick aluminum case with observation window

Vacuum Level: stable vacuum condition; vacuum degree and circulation times can be set independently

Vacuum mode (once or twice) selectable

Easy program setting for specific vacuum conditions

Vacuum degree up to -90 kPa ~ 0, good sealing performance

Air leakage within 1 minute not more than 0.01 MPa

Vacuum Hold Time: 0–9999 s, adjustable

Sealing Advantage: Sealing head made of copper, good heat transfer; Adjustable plate for different battery specifications, easy adjustment

Sealing Head Temperature: RT–250°C, adjustable

Temperature Accuracy: ±2°C

Heat Sealing Pressure: 0–7 kg/cm², adjustable

Hot Sealing Time: 0–99 s, adjustable

Sealing Blade: Hard type (without rubber), only for aluminum case sealing, not suitable for tab-in-between cases

Sealing Width: 5 mm, customizable

Sealing Head Length: 200 mm

Suitable Battery Size (Inner size): 180 × 120 × 10 mm

Dimensions:

Work box: 570 × 420 × 750 mm

Control unit: 460 × 480 × 250 mm

Inner chamber: 350 × 285 × 165 mm

Net weight: about 76 kg

ACEY-VSS200 Vacuum diffusion and pre-sealing all-in-one machine is designed for professional lithium-ion battery research. It is mainly used to remove air from the electrolyte under vacuum conditions after the electrolyte is injected into the polymerized lithium ion battery/cylindrical battery, and finally forms a seal. It is easy to operate and suitable for all types of batteries (especially soft bag battery and cylinder battery). Unique periods of vacuum control system allows electrolyte to thoroughly saturate the electrodes to ensure the best battery charging-discharging performance.