ACEY ACEY-SVS200 Battery Secondary Vacuum Heating Sealer For Pouch Cell Final Sealing

Cavity material: Aluminum alloy, corrosion-resistant and rigid structure

Vacuum level: ≤ -96 kPa (vacuum pump to be provided by buyer)

Head temperature: room temperature ~ 250°C, adjustable

Temperature control accuracy: ±1.5°C

Heat sealing pressure: 0–7 kg/cm², adjustable

Heat sealing time: 0–99 s, adjustable

Edge sealing width: 5 ± 0.4 mm (customizable)

Sealing length: 200 mm

Applicable battery size: 200 mm (length) × 120 mm (width)

Sealing thickness range: 60–300 μm

Sealing thickness accuracy: difference between any two points < 15 μm

Gas consumption: about 0.2 L compressed gas per cycle

Pneumatic working speed: ≥180 cycles/hour

Power: 300 W heating tube, total heating power consumption about 0.6 kW

Compressed air source: 0.5–0.7 MPa

Power supply: 220V / 50Hz

Dimensions (working part): L510 × W510 × H710 mm

Weight: about 70 kg

1. The head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and saves energy compared with similar products.

2. The pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters.

3. The upper and lower heads are driven by cylinders and guided by two linear guide sleeves, which can move up and down flexibly and accurately.

Ensure the parallelism requirements of the product after edge sealing.

4. With automatic puncture function.

5. The cover cavity is driven by an air cylinder and guided by a linear guide sleeve, which can move up and down flexibly, and the guidance is accurate to ensure the product tightness requirements.

6. It can be applied to batteries of different specifications, and the adjustment is simple and convenient.

7. Easy to operate, beautiful appearance, small size and light weight.