ACEY ACEY-BT10040-1 Battery Pack Charging Discharging Aging Tester

Input Power: AC220V ±10% / 50Hz

Voltage Measuring Range: 10–100V

Voltage Accuracy: ±(0.2% of Reading + 0.2% of Range)

Charging Current Range: 200–20000mA

Charging Accuracy: ±(0.2% of Reading + 0.2% of Range)

Discharge Current Range: 200–40000mA

Discharge Accuracy: ±(0.2% of Reading + 0.2% of Range)

Constant Voltage Cut-off Current: Minimum 200mA

Capacity Accuracy: ±1‰

Discharge Power: ≤4000W

Inspection Time: Real-time response <2S

Timer Range: 0–999

Data Recording Interval: ≥5S

Mid-Position Machine Version: 1.1 series

Charging Mode: Constant voltage and constant current charging

Charge Cut-off Conditions: Voltage, current, relative time, overcharge protection

Discharge Mode: Constant-current discharge

Discharge Cut-off Conditions: Voltage, relative time, over-discharge protection

Cycle Measurement Range: 1–999 times

Number of Steps in a Single Cycle: 100

Voltage and Current Detection Sampling: Four-wire sampling system

Database: Supports SQL database for test data management

Upper Computer Communication Mode: Based on TCP/IP protocol, serial port

Data Output Mode: Excel, TXT, Graph

Communication Interface: Network port

Number of Channels Per Cabinet: Single channel

Cabinet Size (W×D×H): 800 × 520 × 1370mm

Battery Space Size (W×D×H): 700 × 400 × 420mm

This charge-discharge test equipment is mainly used for lithium battery charge-discharge cycle test, the test items include: battery charge protection voltage, discharge protection voltage, capacity, etc. The device has four test steps: charging, discharging, shelving, and cycling. By editing the corresponding steps, the battery can be tested in accordance with the set process.