Aaronia SPECTRAN HF-60100 V4 X RF USB Spectrum-Analyzer up to 9,4GHz

• Frequency range: 1MHz to 9,4GHz
• DANL: -155dBm(1Hz)
• DANL with Preamp: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
• Units: dBm, dBµV, V/m, A/m, W/m²
  dBµV/m, W/cm² etc.
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM, GSM
• Input: 50 Ohm SMA RF-input (f)
• Accuracy: +/- 1dB (typ.)
• Interface: USB 2.0/1.1
• Dimensions (L/W/D): 210x136x26 mm
• Weight: 1600gr
• Warranty: 10 years

Highlights:

• Exposure limit calculation and display according to DIN/VDE 0848
• Up to 100x faster sample time as V3 units
• Up to 60dB higher sensitivity as V3 units
• Low noise preamplifier (option)
• 14Bit Dual-ADC
• DDC Hardware-Filter
• 150 MIPS DSP (CPU)
• Real-time remote control via USB
• Vector (I/Q) measurement
• Real-time Peak Power Detector (option)
• Internal speaker (which can be switched off)
• Audio out for the use of PC based FFT analyzer software
• Included OmniLOG antenna
• Very thick (3mm) aluminium housing offering very good screening.
• 100% powered by the external power supply only (no battery)
• Free MAC OS, Linux and Windows software

Application examples

Included in delivery

Options

Accessories

Downloads

Datasheet (pdf)

• Frequency range: 1MHz to 9,4GHz
• DANL: -155dBm(1Hz)
• DANL with Preamp: -170dBm(1Hz)
• Max. power: +20dBm (opt. +40dBm)
• Lowest sample time: 5mS
• Resolution (RBW): 200Hz to 50MHz
• EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
• Units: dBm, dBµV, V/m, A/m, W/m²
  dBµV/m, W/cm² etc.
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM, GSM
• Input: 50 Ohm SMA RF-input (f)
• Accuracy: +/- 1dB (typ.)
• Interface: USB 2.0/1.1
• Dimensions (L/W/D): 210x136x26 mm
• Weight: 1600gr
• Warranty: 10 years

Highlights:

• Exposure limit calculation and display according to DIN/VDE 0848
• Up to 100x faster sample time as V3 units
• Up to 60dB higher sensitivity as V3 units
• Low noise preamplifier (option)
• 14Bit Dual-ADC
• DDC Hardware-Filter
• 150 MIPS DSP (CPU)
• Real-time remote control via USB
• Vector (I/Q) measurement
• Real-time Peak Power Detector (option)
• Internal speaker (which can be switched off)
• Audio out for the use of PC based FFT analyzer software
• Included OmniLOG antenna
• Very thick (3mm) aluminium housing offering very good screening.
• 100% powered by the external power supply only (no battery)
• Free MAC OS, Linux and Windows software

Application examples

Included in delivery

Options

Accessories

Downloads